"""
Base class with plot generating commands.
Does not define any special non-GMT methods (savefig, show, etc).
"""
import csv
import os
import numpy as np
import pandas as pd
from .clib import Session
from .exceptions import GMTInvalidInput
from .helpers import (
build_arg_string,
dummy_context,
data_kind,
fmt_docstring,
GMTTempFile,
use_alias,
kwargs_to_strings,
)
class BasePlotting:
"""
Base class for Figure and Subplot.
Defines the plot generating methods and a hook for subclasses to insert
special arguments (the _preprocess method).
"""
def _preprocess(self, **kwargs): # pylint: disable=no-self-use
"""
Make any changes to kwargs or required actions before plotting.
This method is run before all plotting commands and can be used to
insert special arguments into the kwargs or make any actions that are
required before ``call_module``.
For example, the :class:`pygmt.Figure` needs this to tell the GMT modules
to plot to a specific figure.
This is a dummy method that does nothing.
Returns
-------
kwargs : dict
The same input kwargs dictionary.
Examples
--------
>>> base = BasePlotting()
>>> base._preprocess(resolution='low')
{'resolution': 'low'}
"""
return kwargs
@fmt_docstring
@use_alias(
R="region",
J="projection",
A="area_thresh",
B="frame",
D="resolution",
I="rivers",
N="borders",
W="shorelines",
G="land",
S="water",
)
@kwargs_to_strings(R="sequence")
def coast(self, **kwargs):
"""
Plot continents, shorelines, rivers, and borders on maps
Plots grayshaded, colored, or textured land-masses [or water-masses] on
maps and [optionally] draws coastlines, rivers, and political
boundaries. Alternatively, it can (1) issue clip paths that will
contain all land or all water areas, or (2) dump the data to an ASCII
table. The data files come in 5 different resolutions: (**f**)ull,
(**h**)igh, (**i**)ntermediate, (**l**)ow, and (**c**)rude. The full
resolution files amount to more than 55 Mb of data and provide great
detail; for maps of larger geographical extent it is more economical to
use one of the other resolutions. If the user selects to paint the
land-areas and does not specify fill of water-areas then the latter
will be transparent (i.e., earlier graphics drawn in those areas will
not be overwritten). Likewise, if the water-areas are painted and no
land fill is set then the land-areas will be transparent.
A map projection must be supplied.
Full option list at :gmt-docs:`coast.html`
{aliases}
Parameters
----------
{J}
{R}
A : int, float, or str
``'min_area[/min_level/max_level][+ag|i|s|S][+r|l][+ppercent]'``
Features with an area smaller than min_area in km^2 or of
hierarchical level that is lower than min_level or higher than
max_level will not be plotted.
{B}
C : str
Set the shade, color, or pattern for lakes and river-lakes.
D : str
Selects the resolution of the data set to use ((f)ull, (h)igh,
(i)ntermediate, (l)ow, and (c)rude).
G : str
Select filling or clipping of “dry” areas.
I : str
``'river[/pen]'``
Draw rivers. Specify the type of rivers and [optionally] append pen
attributes.
N : str
``'border[/pen]'``
Draw political boundaries. Specify the type of boundary and
[optionally] append pen attributes
S : str
Select filling or clipping of “wet” areas.
{U}
W : str
``'[level/]pen'``
Draw shorelines [Default is no shorelines]. Append pen attributes.
"""
kwargs = self._preprocess(**kwargs)
with Session() as lib:
lib.call_module("coast", build_arg_string(kwargs))
@fmt_docstring
@use_alias(
R="region",
J="projection",
B="frame",
C="cmap",
D="position",
F="box",
G="truncate",
W="scale",
)
@kwargs_to_strings(R="sequence", G="sequence")
def colorbar(self, **kwargs):
"""
Plot a gray or color scale-bar on maps.
Both horizontal and vertical scales are supported. For CPTs with gradational
colors (i.e., the lower and upper boundary of an interval have different colors)
we will interpolate to give a continuous scale. Variations in intensity due to
shading/illumination may be displayed by setting the option -I. Colors may be
spaced according to a linear scale, all be equal size, or by providing a file
with individual tile widths.
Full option list at :gmt-docs:`colorbar.html`
Parameters
----------
position (D) : str
``[g|j|J|n|x]refpoint[+wlength[/width]][+e[b|f][length]][+h|v][+jjustify]
[+m[a|c|l|u]][+n[txt]][+odx[/dy]]``.
Defines the reference point on the map for the color scale using one of four
coordinate systems:
(1) Use -Dg for map (user) coordinates,
(2) use -Dj or -DJ for setting refpoint via a 2-char justification code that
refers to the (invisible) map domain rectangle,
(3) use -Dn for normalized (0-1) coordinates, or
(4) use -Dx for plot coordinates (inches, cm, etc.).\
All but -Dx requires both -R and -J to be specified.
Append +w followed by the length and width of the color bar.
If width is not specified then it is set to 4% of the given length.
Give a negative length to reverse the scale bar.
Append +h to get a horizontal scale [Default is vertical (+v)].
By default, the anchor point on the scale is assumed to be the bottom left
corner (BL), but this can be changed by appending +j followed by a 2-char
justification code justify.
box (F) : bool or str
``[+cclearances][+gfill][+i[[gap/]pen]][+p[pen]][+r[radius]][+s[[dx/dy/]
[shade]]]``.
If set to True, draws a rectangular border around the color scale.
Alternatively, specify a different pen with +ppen.
Add +gfill to fill the scale panel [no fill].
Append +cclearance where clearance is either gap, xgap/ygap, or
lgap/rgap/bgap/tgap where these items are uniform, separate in x- and
y-direction, or individual side spacings between scale and border.
Append +i to draw a secondary, inner border as well. We use a uniform gap
between borders of 2p and the MAP_DEFAULTS_PEN unless other values are
specified.
Append +r to draw rounded rectangular borders instead, with a 6p corner
radius. You can override this radius by appending another value.
Finally, append +s to draw an offset background shaded region. Here, dx/dy
indicates the shift relative to the foreground frame [4p/-4p] and shade sets
the fill style to use for shading [gray50].
truncate (G) : list or str
``zlo/zhi``
Truncate the incoming CPT so that the lowest and highest z-levels are to zlo
and zhi. If one of these equal NaN then we leave that end of the CPT alone.
The truncation takes place before the plotting.
scale (W) : float
Multiply all z-values in the CPT by the provided scale. By default the CPT
is used as is.
{aliases}
"""
kwargs = self._preprocess(**kwargs)
with Session() as lib:
lib.call_module("colorbar", build_arg_string(kwargs))
@fmt_docstring
@use_alias(
A="annotation",
B="frame",
C="interval",
G="label_placement",
J="projection",
L="limit",
Q="cut",
R="region",
S="resample",
U="logo",
W="pen",
)
@kwargs_to_strings(R="sequence", L="sequence", A="sequence_plus")
def grdcontour(self, grid, **kwargs):
"""
Convert grids or images to contours and plot them on maps
Takes a grid file name or an xarray.DataArray object as input.
Full option list at :gmt-docs:`grdcontour.html`
{aliases}
Parameters
----------
grid : str or xarray.DataArray
The file name of the input grid or the grid loaded as a DataArray.
C : str or int
Specify the contour lines to generate.
- The filename of a `CPT` file where the color boundaries will
be used as contour levels.
- The filename of a 2 (or 3) column file containing the contour
levels (col 1), (C)ontour or (A)nnotate (col 2), and optional
angle (col 3)
- A fixed contour interval ``cont_int`` or a single contour with
``+[cont_int]``
A : str, int, or list
Specify or disable annotated contour levels, modifies annotated
contours specified in ``-C``.
- Specify a fixed annotation interval ``annot_int`` or a
single annotation level ``+[annot_int]``
- Disable all annotation with ``'-'``
- Optional label modifiers can be specified as a single string
``'[annot_int]+e'`` or with a list of options
``([annot_int], 'e', 'f10p', 'gred')``.
L : str or list of 2 ints
Do no draw contours below `low` or above `high`, specify as string
``'[low]/[high]'`` or list ``[low,high]``.
Q : string or int
Do not draw contours with less than `cut` number of points.
S : string or int
Resample smoothing factor.
{J}
{R}
{B}
{G}
{W}
"""
kwargs = self._preprocess(**kwargs)
kind = data_kind(grid, None, None)
with Session() as lib:
if kind == "file":
file_context = dummy_context(grid)
elif kind == "grid":
file_context = lib.virtualfile_from_grid(grid)
else:
raise GMTInvalidInput("Unrecognized data type: {}".format(type(grid)))
with file_context as fname:
arg_str = " ".join([fname, build_arg_string(kwargs)])
lib.call_module("grdcontour", arg_str)
@fmt_docstring
@use_alias(R="region", J="projection", W="pen", B="frame", I="shading", C="cmap")
@kwargs_to_strings(R="sequence")
def grdimage(self, grid, **kwargs):
"""
Project grids or images and plot them on maps.
Takes a grid file name or an xarray.DataArray object as input.
Full option list at :gmt-docs:`grdimage.html`
{aliases}
Parameters
----------
grid : str or xarray.DataArray
The file name of the input grid or the grid loaded as a DataArray.
"""
kwargs = self._preprocess(**kwargs)
kind = data_kind(grid, None, None)
with Session() as lib:
if kind == "file":
file_context = dummy_context(grid)
elif kind == "grid":
file_context = lib.virtualfile_from_grid(grid)
else:
raise GMTInvalidInput("Unrecognized data type: {}".format(type(grid)))
with file_context as fname:
arg_str = " ".join([fname, build_arg_string(kwargs)])
lib.call_module("grdimage", arg_str)
@fmt_docstring
@use_alias(
R="region",
J="projection",
B="frame",
S="style",
G="color",
W="pen",
i="columns",
l="label",
C="cmap",
)
@kwargs_to_strings(R="sequence", i="sequence_comma")
def plot(self, x=None, y=None, data=None, sizes=None, direction=None, **kwargs):
"""
Plot lines, polygons, and symbols on maps.
Used to be psxy.
Takes a matrix, (x,y) pairs, or a file name as input and plots lines,
polygons, or symbols at those locations on a map.
Must provide either *data* or *x* and *y*.
If providing data through *x* and *y*, *color* (G) can be a 1d array
that will be mapped to a colormap.
If a symbol is selected and no symbol size given, then psxy will
interpret the third column of the input data as symbol size. Symbols
whose size is <= 0 are skipped. If no symbols are specified then the
symbol code (see *S* below) must be present as last column in the
input. If *S* is not used, a line connecting the data points will be
drawn instead. To explicitly close polygons, use *L*. Select a fill
with *G*. If *G* is set, *W* will control whether the polygon outline
is drawn or not. If a symbol is selected, *G* and *W* determines the
fill and outline/no outline, respectively.
Full option list at :gmt-docs:`plot.html`
{aliases}
Parameters
----------
x, y : 1d arrays
Arrays of x and y coordinates of the data points.
data : str or 2d array
Either a data file name or a 2d numpy array with the tabular data.
Use option *columns* (i) to choose which columns are x, y, color,
and size, respectively.
sizes : 1d array
The sizes of the data points in units specified in *style* (S).
Only valid if using *x* and *y*.
direction : list of two 1d arrays
If plotting vectors (using ``style='V'`` or ``style='v'``), then
should be a list of two 1d arrays with the vector directions. These
can be angle and length, azimuth and length, or x and y components,
depending on the style options chosen.
{J}
{R}
A : bool or str
``'[m|p|x|y]'``
By default, geographic line segments are drawn as great circle
arcs. To draw them as straight lines, use *A*.
{B}
{CPT}
D : str
``'dx/dy'``: Offset the plot symbol or line locations by the given
amounts dx/dy.
E : bool or str
``'[x|y|X|Y][+a][+cl|f][+n][+wcap][+ppen]'``.
Draw symmetrical error bars.
{G}
S : str
Plot symbols (including vectors, pie slices, fronts, decorated or
quoted lines).
{W}
{U}
l : str
Add a legend entry for the symbol or line being plotted.
"""
kwargs = self._preprocess(**kwargs)
kind = data_kind(data, x, y)
extra_arrays = []
if "S" in kwargs and kwargs["S"][0] in "vV" and direction is not None:
extra_arrays.extend(direction)
if "G" in kwargs and not isinstance(kwargs["G"], str):
if kind != "vectors":
raise GMTInvalidInput(
"Can't use arrays for color if data is matrix or file."
)
extra_arrays.append(kwargs["G"])
del kwargs["G"]
if sizes is not None:
if kind != "vectors":
raise GMTInvalidInput(
"Can't use arrays for sizes if data is matrix or file."
)
extra_arrays.append(sizes)
with Session() as lib:
# Choose how data will be passed in to the module
if kind == "file":
file_context = dummy_context(data)
elif kind == "matrix":
file_context = lib.virtualfile_from_matrix(data)
elif kind == "vectors":
file_context = lib.virtualfile_from_vectors(x, y, *extra_arrays)
with file_context as fname:
arg_str = " ".join([fname, build_arg_string(kwargs)])
lib.call_module("plot", arg_str)
@fmt_docstring
@use_alias(
R="region",
J="projection",
B="frame",
S="skip",
G="label_placement",
W="pen",
L="triangular_mesh_pen",
i="columns",
C="levels",
)
@kwargs_to_strings(R="sequence", i="sequence_comma")
def contour(self, x=None, y=None, z=None, data=None, **kwargs):
"""
Contour table data by direct triangulation.
Takes a matrix, (x,y,z) pairs, or a file name as input and plots lines,
polygons, or symbols at those locations on a map.
Must provide either *data* or *x*, *y*, and *z*.
[TODO: Insert more documentation]
Full option list at :gmt-docs:`contour.html`
{aliases}
Parameters
----------
x, y, z : 1d arrays
Arrays of x and y coordinates and values z of the data points.
data : str or 2d array
Either a data file name or a 2d numpy array with the tabular data.
{J}
{R}
A : bool or str
``'[m|p|x|y]'``
By default, geographic line segments are drawn as great circle
arcs. To draw them as straight lines, use *A*.
{B}
C : Contour file or level(s)
D : Dump contour coordinates
E : Network information
G : Placement of labels
I : Color the triangles using CPT
L : Pen to draw the underlying triangulation (default none)
N : Do not clip contours
Q : Minimum contour length
``'[p|t]'``
S : Skip input points outside region
``'[p|t]'``
{W}
X : Origin shift x
Y : Origin shift y
"""
kwargs = self._preprocess(**kwargs)
kind = data_kind(data, x, y, z)
if kind == "vectors" and z is None:
raise GMTInvalidInput("Must provided both x, y, and z.")
with Session() as lib:
# Choose how data will be passed in to the module
if kind == "file":
file_context = dummy_context(data)
elif kind == "matrix":
file_context = lib.virtualfile_from_matrix(data)
elif kind == "vectors":
file_context = lib.virtualfile_from_vectors(x, y, z)
with file_context as fname:
arg_str = " ".join([fname, build_arg_string(kwargs)])
lib.call_module("contour", arg_str)
@fmt_docstring
@use_alias(R="region", J="projection", B="frame")
@kwargs_to_strings(R="sequence")
def basemap(self, **kwargs):
"""
Produce a basemap for the figure.
Several map projections are available, and the user may specify
separate tick-mark intervals for boundary annotation, ticking, and
[optionally] gridlines. A simple map scale or directional rose may also
be plotted.
At least one of the options *B*, *L*, or *T* must be specified.
Full option list at :gmt-docs:`basemap.html`
{aliases}
Parameters
----------
{J}
{R}
{B}
L : str
``'[g|j|J|n|x]refpoint'``
Draws a simple map scale centered on the reference point specified.
Td : str
Draws a map directional rose on the map at the location defined by
the reference and anchor points.
Tm : str
Draws a map magnetic rose on the map at the location defined by the
reference and anchor points
{U}
"""
kwargs = self._preprocess(**kwargs)
if not ("B" in kwargs or "L" in kwargs or "T" in kwargs):
raise GMTInvalidInput("At least one of B, L, or T must be specified.")
with Session() as lib:
lib.call_module("basemap", build_arg_string(kwargs))
@fmt_docstring
@use_alias(R="region", J="projection")
@kwargs_to_strings(R="sequence")
def logo(self, **kwargs):
"""
Place the GMT graphics logo on a map.
By default, the GMT logo is 2 inches wide and 1 inch high and
will be positioned relative to the current plot origin.
Use various options to change this and to place a transparent or
opaque rectangular map panel behind the GMT logo.
Full option list at :gmt-docs:`logo.html`
{aliases}
Parameters
----------
{J}
{R}
D : str
``'[g|j|J|n|x]refpoint+wwidth[+jjustify][+odx[/dy]]'``.
Sets reference point on the map for the image.
F : bool or str
Without further options, draws a rectangular border around the
GMT logo.
{U}
"""
kwargs = self._preprocess(**kwargs)
if "D" not in kwargs:
raise GMTInvalidInput("Option D must be specified.")
with Session() as lib:
lib.call_module("logo", build_arg_string(kwargs))
@fmt_docstring
@use_alias(R="region", J="projection")
@kwargs_to_strings(R="sequence")
def image(self, imagefile, **kwargs):
"""
Place images or EPS files on maps.
Reads an Encapsulated PostScript file or a raster image file and plots it on a map.
Full option list at :gmt-docs:`image.html`
{aliases}
Parameters
----------
{J}
{R}
D: str
``'[g|j|J|n|x]refpoint+rdpi+w[-]width[/height][+jjustify][+nnx[/ny]][+odx[/dy]]'``
Sets reference point on the map for the image.
F : bool or str
``'[+cclearances][+gfill][+i[[gap/]pen]][+p[pen]][+r[radius]][+s[[dx/dy/][shade]]]'``
Without further options, draws a rectangular border around the
image using **MAP_FRAME_PEN**.
M : bool
Convert color image to monochrome grayshades using the (television)
YIQ-transformation.
"""
kwargs = self._preprocess(**kwargs)
with Session() as lib:
arg_str = " ".join([imagefile, build_arg_string(kwargs)])
lib.call_module("image", arg_str)
@fmt_docstring
@use_alias(R="region", J="projection", D="position", F="box")
@kwargs_to_strings(R="sequence")
def legend(self, spec=None, **kwargs):
"""
Plot legends on maps.
Makes legends that can be overlaid on maps. Reads specific legend-related
information from either a) an input file or b) a list containing a list
of figure handles and a list of corresponding labels. Unless otherwise
noted, annotations will be made using the primary annotation font and
size in effect (i.e., FONT_ANNOT_PRIMARY).
Full option list at :gmt-docs:`legend.html`
{aliases}
Parameters
----------
spec : None or str
Either None (default) for using the automatically generated legend
specification file, or a filename pointing to the legend specification file.
{J}
{R}
position (D) : str
``'[g|j|J|n|x]refpoint+wwidth[/height][+jjustify][+lspacing][+odx[/dy]]'``
Defines the reference point on the map for the legend.
box (F) : bool or str
``'[+cclearances][+gfill][+i[[gap/]pen]][+p[pen]][+r[radius]][+s[[dx/dy/][shade]]]'``
Without further options, draws a rectangular border around the
legend using **MAP_FRAME_PEN**.
"""
kwargs = self._preprocess(**kwargs)
with Session() as lib:
if spec is None:
specfile = ""
elif data_kind(spec) == "file":
specfile = spec
else:
raise GMTInvalidInput("Unrecognized data type: {}".format(type(spec)))
arg_str = " ".join([specfile, build_arg_string(kwargs)])
lib.call_module("legend", arg_str)
@fmt_docstring
@use_alias(R="region", J="projection")
@kwargs_to_strings(
R="sequence",
textfiles="sequence_space",
angle="sequence_comma",
font="sequence_comma",
justify="sequence_comma",
)
def text(
self,
textfiles=None,
x=None,
y=None,
text=None,
angle=None,
font=None,
justify=None,
**kwargs,
):
"""
Plot or typeset text on maps
Used to be pstext.
Takes in textfile(s) or (x,y,text) triples as input.
Must provide at least *textfiles* or *x*, *y*, and *text*.
Full option list at :gmt-docs:`text.html`
{aliases}
Parameters
----------
textfiles : str or list
A text data file name, or a list of filenames containing 1 or more records
with (x, y[, font, angle, justify], text).
x, y : float or 1d arrays
The x and y coordinates, or an array of x and y coordinates to plot the text
text : str or 1d array
The text string, or an array of strings to plot on the figure
angle: int/float or bool
Set the angle measured in degrees counter-clockwise from horizontal. E.g. 30
sets the text at 30 degrees. If no angle is given then the input textfile(s)
must have this as a column.
font : str or bool
Set the font specification with format "size,font,color" where size is text
size in points, font is the font to use, and color sets the font color. E.g.
"12p,Helvetica-Bold,red" selects a 12p red Helvetica-Bold font. If no font
info is given then the input textfile(s) must have this information in one
of its columns.
justify: str or bool
Set the alignment which refers to the part of the text string that will be
mapped onto the (x,y) point. Choose a 2 character combination of L, C, R
(for left, center, or right) and T, M, B for top, middle, or bottom. E.g.,
BL for lower left. If no justification is given then the input textfile(s)
must have this as a column.
{J}
{R}
"""
kwargs = self._preprocess(**kwargs)
kind = data_kind(textfiles, x, y, text)
if kind == "vectors" and text is None:
raise GMTInvalidInput("Must provide text with x and y.")
if kind == "file":
for textfile in textfiles.split(" "): # ensure that textfile(s) exist
if not os.path.exists(textfile):
raise GMTInvalidInput(f"Cannot find the file: {textfile}")
if angle is not None or font is not None or justify is not None:
if "F" not in kwargs.keys():
kwargs.update({"F": ""})
if angle is not None and isinstance(angle, (int, float)):
kwargs["F"] += f"+a{str(angle)}"
if font is not None and isinstance(font, str):
kwargs["F"] += f"+f{font}"
if justify is not None and isinstance(justify, str):
kwargs["F"] += f"+j{justify}"
with GMTTempFile(suffix=".txt") as tmpfile:
with Session() as lib:
if kind == "file":
fname = textfiles
elif kind == "vectors":
pd.DataFrame.from_dict(
{
"x": np.atleast_1d(x),
"y": np.atleast_1d(y),
"text": np.atleast_1d(text),
}
).to_csv(
tmpfile.name,
sep="\t",
header=False,
index=False,
quoting=csv.QUOTE_NONE,
)
fname = tmpfile.name
arg_str = " ".join([fname, build_arg_string(kwargs)])
lib.call_module("text", arg_str)